The EPEVER Tracer AN Sequence Solar Cost Controller can be a highly successful photo voltaic controller designed for off-grid solar techniques. Dependant on multiphase synchronous rectification engineering, it assures optimized Electricity conversion and process steadiness for a variety of photovoltaic (PV) applications.
Important Attributes in the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence utilizes EPEVER Solar Charge Controller technologies for outstanding solar Vitality harvesting. Crucial characteristics incorporate:
Multiphase Synchronous Rectification (MSR) for improved Electricity conversion.
Sophisticated MPPT Algorithm with >99% efficiency.
Dual-Phase Charging for Increased battery everyday living.
Liquid crystal display Exhibit with authentic-time facts checking.
A number of Load Management Modes like guide and timer.
Extensive Electronic Protections towards overcharging, more than-discharging, limited circuits, and reverse polarity.
Phase-by-Stage Guidebook to Creating the EPEVER Tracer AN Series Controller
1. Unboxing and Making ready the Controller
Be certain all factors are involved: Tracer AN device, temperature sensor, conversation cables, and user handbook.
Validate the design amount and voltage ratings match your solar panel and battery technical specs.
two. Mounting the Cost Controller
Pick a nicely-ventilated, dry location near to the battery financial institution.
Secure the Tracer AN controller using the delivered mounting brackets.
Retain suitable clearance for heat dissipation.
3. Wiring the Solar Demand Controller
Warning: Constantly stick to correct safety protocols and make sure the technique is powered off before connecting factors.
Phase 1: Connect the battery terminals to your cost controller (good to beneficial, adverse to damaging).
Step two: Link the solar panel array into the PV enter terminals.
Stage three: Hook up the load terminals if using a immediate load link.
Step four: Double-Verify all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electrical power around the controller by connecting the battery to start with.
Make use of the LCD Display screen to navigate the configurations menu.
Configure:
Battery Type: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Command Modes: Guide, timer, mild control.
5. Checking and Data Logging
The Tracer AN Series supports actual-time checking utilizing the MT50 distant meter.
Data is usually logged through the RS485 communication port using program for example Solar Station Laptop.
Remote checking is feasible While using the EPEVER WiFi module.
6. Troubleshooting Common Difficulties
Problem one: No Electrical power Output
Examine battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Problem two: More than-Voltage Security
Verify the photo voltaic array’s voltage rating.
Change method parameters if required.
Issue 3: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT options in the menu.
Advantages of the Tracer AN Collection with MSR Know-how
The multiphase synchronous rectification technologies makes certain:
Higher Effectiveness: Reduced visit here Vitality losses during conversion.
Improved Trustworthiness: Stable functionality less than variable masses.
For a longer period Battery Existence: Dependable and correct charging profiles.
Summary
The EPEVER Photo voltaic Cost Controller with multiphase synchronous rectification technological know-how is surely an Remarkable choice for optimizing solar energy technology and extending battery lifetime. By following the above set up guideline, customers can guarantee maximum efficiency and technique longevity.