The EPEVER Tracer AN Collection Solar Charge Controller is actually a very economical photo voltaic controller designed for off-grid solar devices. Dependant on multiphase synchronous rectification technological know-how, it assures optimized Strength conversion and system balance for a variety of photovoltaic (PV) apps.
Critical Functions with the EPEVER Tracer AN Series Controller
The Tracer AN sequence makes use of EPEVER Photo voltaic Demand Controller technological know-how for top-quality solar Vitality harvesting. Critical capabilities incorporate:
Multiphase Synchronous Rectification (MSR) for improved Power conversion.
Superior MPPT Algorithm with >99% efficiency.
Twin-Phase Charging for Increased battery lifetime.
LCD Display with actual-time knowledge checking.
Various Load Control Modes like manual and timer.
Extensive Electronic Protections towards overcharging, in excess of-discharging, brief circuits, and reverse polarity.
Phase-by-Stage Manual to Organising the EPEVER Tracer AN Sequence Controller
1. Unboxing and Preparing the Controller
Make sure all elements are bundled: Tracer AN unit, temperature sensor, interaction cables, and user handbook.
Confirm the model range and voltage rankings match your photo voltaic panel and battery specs.
two. Mounting the Cost Controller
Pick a very well-ventilated, dry location near the battery lender.
Safe the Tracer AN controller utilizing the delivered mounting brackets.
Retain good clearance for warmth dissipation.
3. Wiring the Solar Charge Controller
Caution: Usually adhere to proper protection protocols and make sure the technique is driven off ahead of connecting parts.
Phase 1: Hook up the battery terminals on the demand controller (good to optimistic, unfavorable to detrimental).
Action 2: Connect the photo voltaic panel array for the PV input terminals.
Stage 3: Join the load terminals if utilizing a direct load relationship.
Phase 4: Double-check all connections for polarity and tightness.
four. Configuring the Controller Configurations
Electricity within the controller by connecting the battery first.
Make use of the LCD Exhibit to navigate the options Read more menu.
Configure:
Battery Kind: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Handbook, timer, light Regulate.
five. Monitoring and Data Logging
The Tracer AN Collection supports actual-time checking utilizing the MT50 remote meter.
Details might be logged via the RS485 interaction port employing computer software such as Photo voltaic Station PC.
Remote checking is feasible Using the EPEVER WiFi module.
six. Troubleshooting Frequent Challenges
Situation one: No Electrical power Output
Check battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Issue two: Over-Voltage Protection
Validate the photo voltaic array’s voltage ranking.
Alter procedure parameters if required.
Challenge 3: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT options from the menu.
Great things about the Tracer AN Collection with MSR Engineering
The multiphase synchronous rectification technologies makes sure:
Greater Effectiveness: Lessened energy losses through conversion.
Enhanced Reliability: Steady general performance underneath variable hundreds.
Extended Battery Existence: Reliable and exact charging profiles.
Conclusion
The EPEVER Solar Charge Controller with multiphase synchronous rectification technology is really an Extraordinary option for optimizing solar energy technology and extending battery existence. By adhering to the above setup guide, people can make certain utmost performance and procedure longevity.